LXP30 series power resistors

Detailed Product Description

LXP30  series power resistors

EBG offers the totally encapsulated and insulated TO-220 package for low ohmic value and non-inductive design for high frequency and pulsing applications.
Ideal use is for power supplies. This series is rated at 30 Watts mounted to a heat sink.
The special features include:30 Watt power rating at 25°C case temperature
TO-220 package configuration,Single screw mounting simplifies attachment to the heat sink.
A totally molded housing for enviromental protection.Non-Inductive design,Resistor package totally insulated from heat sink.

Resistance Range: 0.05Ω to 1MΩ other values on request
Resistance Tolerance:±1%, ±2%, ±5%, ±10% (0.5% on request)
Temperature Coefficient:10Ω and above, ±50ppm/°C,referenced to 25°C, ∠R taken at
+105°C. Between 1Ω and 10Ω, ±(100ppm+0.002Ω)/°C, referenced to 25°C, ∠R taken at +105°C
Max. Operating Voltage: 350 V
Dielectric Strength: 1,800V AC
Power Rating:30 W at 25°C. Depends upon case temperature. 
Insulation Resistance:10 GΩ min.
Momentary Overload:2 times rated power with applied voltage not to exceed 1.5 times
maximum continuous operating voltage for 5 seconds, DR ± (0.3%+ 0.001Ω) max.
Load Life:MIL-R-39009, 2,000 hours at rated power, DR ±(1.0% +0.001Ω).
Moisture Resistance:MIL-Std-202, Method 106, ∠R±(0.5% + 0.001Ω) max.
Thermal Shock:MIL-Std-202, Method 107, Cond. F, ∠R±(0.3% + 0.001Ω) max.
Terminal Strength:MIL-Std-202, Method 211, Cond.A (Pull Test) 2.4N., DR ±(0.2% +
0.001Ω) max.
Vibration, High Frequency:MIL-Std-202, Method 204, Cond.D, ∠R ±(0.2% + 0.001Ω) max.
Lead Material: Tinned Copper
Max. Torque: Using a screw and a compression washer mounting
technique is 0.9 Nm