LXP100 series power resistors

Detailed Product Description

LXP100 series power resistors

EBG offers the totally encapsulated and insulated TO-247 package for low ohmic value and non-inductive design for high frequency and pulsing applications.Ideal use is for power supplies. This series is rated at 100 Watts mounted to a heat sink.
The special features include:100 Watt power rating at 25°C case temperature
TO-247 package configuration,Single screw mounting simplifies,attachment to the heat sink.
A totally molded housing for enviromental protection.Non-Inductive design,Resistor package totally insulated from heat sink.

Resistance Range: 0.05Ω to 1MΩ  other values on request
Resistance Tolerance:±1%, ±2%, ±5%, ±10%
Temperature Coefficient:>10Ω: ±50ppm/°C, referenced to 25°C, ∠R taken at +105°C;
others on request!
Max. Operating Voltage: 350 V
Dielectric Strength: 1,800V AC
Insulation resistance: 10GΩ min.
Power Rating:100 W at 25°C case temperature.derated to 0 W at 175°C.
Momentary Overload:1.5 times rated power and V(DC) <1.5Vmax for 5 seconds.
∠R < ± (0.50% + 0.0005Ω)
Dielectric strength:GJB-360A-96 method 301,(1,800V AC, 60s),∠R < ± (0.15% + 0.0005Ω)
Life:MIL-R-39009D 4.8.13 , 2,000hours at rated power,∠R < ±(1.0% + 0.0005Ω).
Moisture Resistance:-10°C - +65°C, RH>90%, cycle 240 h,∠R < ±(0.50% + 0.0005Ω)
Thermal Shock:GJB-360A-96 method 107,Cond. F, ∠R < ±(0.50% + 0.0005Ω)
Terminal Strength:GJB-360A-96 method 211, Cond.A (Pull Test) 2.4N.,∠R < ±(0.20% + 0.0005Ω)
Vibration, High Frequency:GJB-360A-96 method 204, Cond.D, ∠R < ±(0.40% + 0.0005Ω)
Lead Material: Tinned Copper
Installation - max. Torque: Using a M3 screw and a compression
washer mounting technique is 0.9Nm