SSP/OSP series High Voltage resistor

Detailed Product Description

SSP/OSP series High Voltage resistor

Non-inductive Performance (EBG's patented process) Full power and voltage ratings
(derating not required) Very high resistance values (see table) up to 30MΩ To accomplish this objective of high stability, high value, high voltage and high power in the SSP series,EBG employs a special variation of its METOXFILM formulations. These films are annealed on special ceramic bodies at temperatures above 1400°F/ 800°C and become an inherent part
of the surface of the ceramic, resulting in their unusual performance haracteristics. As a result of EBG's unique non-inductive patented process, these resistors are ideally suited for high frequency applications,and result in less ringing with minimum distortion of the signals and
faster settling times.
Specifications:
Resistance Tolerance:Standard: ±1% to ±10%
Temperature Coefficient:for 10Ω and above 50ppm/°C. TCR referenced to 25°C, ∠R taken at -15°C and +105°C.

Dielectric Strength:1,000 V DC
Insulation Resistance:10GΩ, min.
Overload/Overvoltage:5 times rated power with applied voltage not to exceed 1.5 times
maximum continuous operating voltage for 5 seconds. ∠R 0.5%max. or 0.5W max., whichever is greater. (not valid for SSP 148!)
Load Life:1,000 hours at rated power, ∠R0.5% max. or 0.5W max.,whichever is greater.
Thermal Shock:MIL-Std-202, Method 107, Cond.C, ∠R 0.5% max. or 0.5W max.,whichever is greater.
Max. Operating Temp.: +275°C
Encapsulation:Silicone Conformal
Lead Material:O.F.H.C. Copper, tin plated